Application ：
It is mainly applied to the forging process
of automobile left and right brake S-CAM Shaft. It is also suitable for the the
end and middle of the long rod and long pipe material.
Features :
■ This
machine adopts the whole frame type structure, with compact structure and
reasonable layout, which convenient for operation and maintenance.
■ The molds have
long service life and low damage rate.
■ Higher
production efficiency .
■ Electrical
energy saving .
Technology
process ：
■ Raw
material rod Heating ---
■ Putting the
heated rod into the molds---
■ Vertical
cylinder clamping for upper&lower molds closing and hold pressure ---
■ Horizontal
cylinder extrusion and forging ---
■ Horizontal
cylinder return and presure release -
■ Molds of vertical
cylinder presure release and return -
■ Spray
cooling lubricant and blow air ---
■ Take out
the finished rough S-cam ---
■ One
completed cycle finished .
* Customer Customized Case
| No. | Item | Unit | Parameter | |
| 1 | Nominal force | KN | 3150/5000 | |
| 2 | Maximum working pressure of liquid | MPa | 25 | |
| 3 | Closing (Vertical ) cylinder pressure | KN | 5000 | |
| 4 | Extrusion (horizontal ) cylinder pressure | KN | 3150 | |
| 6 | Maximum opening height of upper and lower mold base | mm | 360 | |
| 7 | Stroke of Closing (Vertical ) cylinder | mm | 400 | |
| 8 | Extrusion (horizontal ) cylinder cylinder stroke | mm | 250 | |
| 10 | Distance between extrusion slider and center of closing cylinder | mm | 550 | |
| 11 |
Distance between the center of the closing cylinder and the inner right of the body |
mm | 880 | |
| 12 | Mold base length | mm | 500 | |
| 13 | Maximum length of S-cam rod | mm | 1100 | |
| 14 | Closing (Vertical ) cylinder speed | Quick downward | mm/s | 150 |
| Working (Pressing ) | mm/s | 37～15 | ||
| Return | mm/s | 150 | ||
| 15 | Extrusion (horizontal )cylinder speed | Forward | mm/s | 60～24 |
| Return | mm/s | 150 | ||
| 16 | Main motor power approx (about ) | kW | 74 | |
XUZHOU METALFORMING PRECISION MACHINERY CO.,LTD 
