Video Link:
https://www.youtube.com/watch?v=AIVWThB1IoI
https://www.youtube.com/watch?v=99INA0vC3lc
https://www.youtube.com/watch?v=7HNFzpCFbWA
https://www.youtube.com/watch?v=weUZ2iyD0Ug
Product Features:
■ With high rigidity rack design, they are welded with the use of high-quality steel plates, through relieving of internal stresses, so that stability and reliability of the whole machine in precision are enhanced.
■ Machine adopts high-alloy-steel, two-bent-axle, and two- wide work center, to optimize design.
■ In order to guarantee relative stationarity of machine operation, it is necessary to equip with two balancers.
■ Moulding-adjustment precision is as high as 0.1 mm, safe, speedy, and reliable.
■ Through hard oxidation and grinding, such parts as bent axles, gear sets, and connecting rods possess higher combination property and tolerance.
■ Adopt highly sensitive and reliable clutch/brake and internationally top duplex magnetic valve, as well as overload protection devices, to guarantee precision and safety for operation and stop of press rams.
■ Machine’s structural design shall be reasonable, for the convenience of realizing automatic production, reducing cost, and improving efficiency.
■ Possess advanced design concepts, low noise, low consumption, and energy saving.
Standard Configuration:
■ Dry clutch brake
■ Standard operating system of xieduan
■ Operation Choice/cutting/inch stroke /safe journey/continuation of operating mode
■ Oil pressure overload protection device
■ Over-run safety device
■ Duplex magnetic valve
■ Misfeed detection consent
■ Electric slider adjusting device
■ Digital moulding-height indicator (unit: 0.1 mm)
■ Electric butter lubricating device
■ Accumulative counter (6 digits)
■ Pre-determined counter (6 digits)
■ Maintenance counter (6 digits)
■ Life counter (6 digits)
■ Electronic rotatry cam switch (6 connections)
■ Air-blast device 1/2" primary circuit
■ Air source connector 1/2" secondary circuit
■ Error inspection socket
■ Power socket (only apply to single-phase 110V power)
Optional Configuration:
■ Wet clutch brake
■ Die cushion device
■ Vs variable-speed motor
■ Touch-screen device
■ Photo-electric safety device
■ Knock-out Device of ram
■ Main motor inversion device
■ Foot switch
■ Safety dog and safety latch
■ T-type two-hand button operating platform
■ Inspection variable-connection magnetic valve
■ Anti-vibration mechanical foot
■ Rapid tooling exchange
■ Upper die clamper
■ Lower die clamper
■ Die lifter
■ Mould-shift arm
■ Basic bolt and soleplate
■ Automatic feeder device
■ Three-in-one NC straightening feeder
■ NC Roll feeder
■ Two-in-one feeder and straightening machine
■ Leveller
* Provide Customized Personalized Service
|
Item |
Unit |
VH-16 |
VH-25 | |||||
Nominal Pressure |
kN |
160 |
250 |
|||||
Nominal Pressure Stroke |
mm |
1.2 |
1.6 |
|||||
Stroke Length |
mm |
10 |
20 | 30 |
10 |
20 | 30 | |
No.of Strokes per minute | mm | 150-650 | 150-600 | 150-550 | 150-600 | 150-550 | 150-500 | |
Max. Die Height | mm | 210 | 205 | 200 | 220 | 215 | 210 | |
Die Height Ajustment | mm | 50 | 50 | |||||
Throat Depth | mm | 150 | 155 | |||||
Bolster Surface | F.B. | mm | 290 | 300 | ||||
L.R. | mm | 480 | 500 | |||||
Bolster Hole Size | F.B. | mm | 80 | 82 | ||||
L.R. | mm | 150 | 150 | |||||
Slider bottom Surface | F.B. | mm | 140 | 158 | ||||
L.R. | mm | 250 | 260 | |||||
Stemhole | mm | Ø40x60 | Ø40x75 | |||||
Distance between Uprights | mm | 180 | 180 | |||||
Thickness of Bolster | mm | 60 | 75 | |||||
Main Motor | kW | 2.2 | 3 | |||||
Overall Dimension | F.B. | mm | 1200 | 1200 | ||||
L.R. | mm | 1000 | 1089 | |||||
Height | mm | 1800 | 2012 | |||||
Air Pressure | MPa | 0.55 | 0.55 | |||||
Gross Weight | kg | 2100 | 2600 |