Product Features :
■ The upper work roollers adopt 4 point micrometer adjustment device, suitable for straightening machine precision requires high processing quality requirements.
■ The roller shaft is made Bearing steel (SUJ2), the heat treatment quenching 60 ~ HRC after hard chromium plating and grinding; high hardness, wear resistance, long service life.
■ The Japanese system of precision bearing, High precision, long service life. Add gear lubrication system. Can be used with any feeding machine.
■ 17 smaller diameter work rolls remove the coil set from the material and ensure the high level of material flatness that precision processing demands.
■ These rolls will reduce the deflection of work roll making strainghtening performance more precise.
Model |
RUS-200F |
RUS-300F |
RUS-400F |
RUS-500F |
RUS-600F |
Msterial Width (mm) |
200 |
300 |
400 |
500 |
600 |
Strip Thiclness (mm) |
0.1-1.5 |
0.1-1.5 |
0.1-1.5 |
0.1-1.3 |
0.1-1.2 |
Max. Meterial Weight (kg) |
500 |
1000 |
1500 |
1500 |
2000 |
Extent Expansion(mm) |
390-520 |
||||
Coi lO.D. (Mm) |
1000 |
1200 |
1200 |
1200 |
1200 |
Straightener Rolls (qty) |
Upper8/Lower9(All Drive Function) |
||||
Pinch Rolls (qty) |
Upper1 / Lower1 (All Driven Function) |
||||
Back up rolls |
N/A |
Porovided |
|||
Adjustment |
4 Points Fine Micro Adjustment |
||||
Speed Range (m/min) |
22 |
||||
Mandrel Expansion |
Manual |
||||
Loop Control |
Touch Sensor |
||||
Air Hold Down Arm |
N/A |
||||
Power Supply |
3Phase 220V/380V/50HZ |